bibo:abstract
  • The accompanying paper, Part Ⅰ, has presented the physical modeling and basic numerical analysis results of both the flow-induced and thermally-induced residual stress and birefringence in injection molded center-gated disks. The present paper, Part Ⅱ, has attempted to investigate the effects of various processing conditions of injection/compression molding process on the residual stress and birefringence. The birefringence is significantly affected by injection melt temperature, packing pressure and packing time. Birefringence in the shell layer increases as melt temperature gets lower. The inner peak of birefringence increases with packing time and packing pressure. On the other hand, packing pressure, packing time and mold wall temperature affect the thermally-induced residual stress rather significantly in the shell layer, but insignificantly in the core region. Injection/compression molding has been found to reduce the birefringence in comparison with the conventional injection molding process. In particular, mold closing velocity and initial opening thickness in the compression stage of injection/compression molding process have significant effect on the flow-induced birefringence, but not on the thermal residual stress and the thermally induced birefringence. (rdf:langString) (en)
dcterms:alternative
  • Effects of processing conditions (xsd:string)
nlon:biographicalNote
  • 권태헌, 회원, 포항공과대학교 기계공학과, thkwon (rdf:langString) (postech.ac.kr)
  • 윤경환, 회원, 단국대학교 기계공학과 (xsd:string)
  • 이영복, 포항공과대학교 기계공학과 (xsd:string)
nlon:classificationNumberOfNLK
  • 550.5 (xsd:string)
nlon:containedIn
dc:creator
  • 권태헌 (xsd:string)
  • 윤경환 (xsd:string)
  • 이영복 (xsd:string)
dcterms:creator
nlon:datePublished
  • 2021-01-30T23:37:12 (xsd:dateTime)
dcterms:description
  • Numerical analysis of residual stresses and birefringence in injection/compression molded center-gated disks, Effects of processing conditions (xsd:string)
bibframe:extent
  • 26 cm (xsd:string)
  • p. 2355-2363 (xsd:string)
dcterms:isPartOf
nlon:issuedYear
  • 2002 (xsd:string)
nlon:itemNumberOfNLK
  • 대446 (xsd:string)
rdfs:label
  • 사출/압축 성형 center-gated 디스크에서의 잔류 응력과 복굴절의 수치 해석 . / 이영복, 권태헌,윤경환 (xsd:string)
dcterms:language
nlon:remainderOfTitle
  • 공정조건의 영향 (xsd:string)
dc:subject
  • Birefringence (xsd:string)
  • Free volume theory (xsd:string)
  • Injection molding (xsd:string)
  • Injection/compression molding (xsd:string)
  • Photoviscoelasticity (xsd:string)
  • Residual stress (xsd:string)
  • Viscoelasticity (xsd:string)
  • 광점탄성 (xsd:string)
  • 복굴절 (xsd:string)
  • 사출성형 (xsd:string)
  • 사출압축성형 (xsd:string)
  • 자유체적이론 (xsd:string)
  • 잔류응력 (xsd:string)
  • 점탄성 (xsd:string)
dcterms:title
  • 사출/압축 성형 center-gated 디스크에서의 잔류 응력과 복굴절의 수치 해석 (xsd:string)
rdf:type
bibo:volume
  • 2 (xsd:string)
nlon:volumeOfNLK
  • 26(11) (xsd:string)